Pay attention to the use of chain

Release time:

2023-03-06 16:10

Before the chain of the car with rear-direction is connected, the chain is shifted to the state of the smallest wheel to the smallest wheel, so that the chain is loose and easy to operate, and it is not easy to "snap" after cutting.
After the chain is cleaned and refueled, slowly reverse the tooth plate. The chain links coming out from the rear should be able to be straightened. If some chain links still maintain a certain angle, it means that they are not smooth and belong to a dead knot, which should be adjusted. The damaged chain link must be replaced in time. It is recommended to strictly distinguish the three types of pin shafts and use the connecting pin shafts for the maintenance chain.
Pay attention to the flatness when using the chain beater, so that it is not easy to distort the thimble. Careful use of tools can not only protect tools, but also achieve good results. Otherwise, tools are vulnerable to damage, and damaged tools are more likely to damage parts, which is a vicious circle.

Related news

图片名称

copyright ©2023 Lanxi Enlin Driving Chain Co., Ltd.

图片名称
图片名称

Add:Shiqulin, Shiqu Town, Lanxi

图片名称

P.C:321100

图片名称
图片名称

Mobile website